搜索

7109A Calibration Time Savings Estimate

Calibrate 4 sensors in half the time

Compare the 7109A Portable Calibration Bath with a 7103 Micro-Bath

A typical 3-point calibration of 4 tri-clamp sanitary sensors takes over 4 hours (259.45 minutes) using a 7103 Micro-Bath. The same calibration using a 7109A Portable Calibration Bath takes about 2 hours (130.0 minutes). That’s a time savings of more than 2 hours per 4-sensor batch!

This table presents the details
7109A Calibration Time Savings Estimate Calibrate four tri-clamp sensors at three temperature points (0, 70, and 125°C) 7103 Micro-Baths
Setpoint		0°C	70°C	125°C
Ramp range		23 to 0°C	0 to 70°C	70 to 125°C
Speed to temperature		25°C to -25°C: 0.9 min/°C	25°C to 100°C: 0.47 min/°C	25°C to 100°C: 0.47 min/°C
Ramp Speed (minutes/°C)		0.9	0.47	0.47
Temperature				?
?	Start	23°C	0°C	70°C
?	End	0°C	70°C	125°C
?	Span	23°C	70°C	55°C
Stabilization Time?(minutes)		60 *	60 *	60*
Calibration Time?(minutes)		80.7	92.9	85.85
Total batch calibration time				259.45

?

7109A Portable Calibration Bath
Setpoint		0°C	70°C		125°C
Ramp range		23 to 0°C	0 to 25°C	25 to 70°C	70 to 125°C
Speed to temperature		25°C to -25°C: 1.5 min/°C	-25°C to 25°C: 0.7 min/°C	25°C to 140°C: 0.48 min/°C	25°C to 140°C: 0.48 min/°C
Ramp Speed (minutes/°C)		1.5	0.7	0.48	0.48
Temperature					?
?	Start	23°C	0°C	25°C	70°C
?	End	0°C	25°C	70°C	125°C
?	Span	23°C	25°C	45°C	55°C
Stabilization Time? (minutes)		10	n/a	10	10
Calibration Time (minutes)		44.5	17.5	31.6	36.4
Total batch calibration time					130.0
The 7109A saves over 2 hours per four sensor batch				Time savings	129.45
*The 7103 Micro-Bath calibrates one tri-clamp sensor at a time. Each sensor takes 15 minutes to stabilize for a total of 60 minutes per batch of four sensors.